No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
These spoilers from Str8 are available in many great colours and can...
Racing CDI NARAKU performance for TGB and Pegasus scooters. The CDI has...
Naraku High Performance clutch bell with patented R-Vent system for more...
Naraku organic lining brake pad with KBA approval in original equipment...
The S1R exhaust is a state-of-the-art...
Reference: 1000-1263.10
Brand: NCY
Electroplated front wheel axle by NCY for Ruckus. . Has safety wire / cotter pin provisions (2mm)! Dimension : 12mm X 250mm. Attention, does not fit OEM forks!
Reference: SCT-LS012/AL
Brand: Ruckhouse
This Low Down Shock is constructed of an anodized black billet body, 550lbs/in coil, and features an adjustable length and spring pre-load. Give your scooter the aggressive stance it deserves with this rear shock. This shock is extremely popular with Honda Ruckus owners that want to go as low as possible. Drop your scooter an extra 1.5in with this shock.
Reference: TRS-SSB88/BK
Brand: TRS
Stabilizes the seam where the main frame meets the rear frame. Made in the USA. Billet T6061 Comes in black or raw. T6061 Aluminum. Joint Rod Ends & nuts included
Reference: RH-177
Brand: Ruckhouse
Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...
Reference: 1000-1336.6
Brand: NCY
These NCY fork tubes provide a smoother ride while lowering your front end 51mm! Attention! You can only use this fork with front disc brake convertion, Ruckus oem fork and wheel are made for Drum brake. The perfect match with our front Hub, 12x8 front wheel, Adelin 220mm Disc Brake, Adelin Caliper mount and Adelin 4 Pistons Caliper. Fork lenght : 330mm /...
Reference: RH-063
Brand: Ruckhouse
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set. Several design available!
Reference: TRS-KIC/AL
Brand: TRS
Is your cheap plastic ignition cover broken or looking for something fancy but don't wanna spend an arm and leg. We have them in stock. CNC Machined out of 6061 Billet Aluminum, and comes in a raw finish so that you can easily finish it off how you like! Easily polished, painted, powder coated to match your bike!
Reference: RH-151
Brand: Ruckhouse
Custom 6061 heat treated aircraft grade aluminium wheel set made Honda Grom and Minarelli engine. Several design available!
Reference: NK390.48
Brand: Naraku
Racing CDI NARAKU performance for TGB and Pegasus scooters. The CDI has no rev limit, meaning the engine can be completely de-throttled and a big bore cylinders added and nothing will stand in its way. The CDI must only be swapped for the original CDI. Of course, the CDI can also be used as spare parts.
Reference: NK900.56
Brand: Naraku
Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower operating temperature and great grip. No delay in the heavily loaded areas. Low weight means better acceleration. Great value for money in the high-end sector.
Reference: PM058
Brand: Turbokit
Replacement O2 sensor bolt
Reference: PM057
Brand: Turbokit
Replacement O2 sensor bolt
Reference: NK430.62
Brand: Naraku
Naraku organic lining brake pad with KBA approval in original equipment quality. The brake pad compound is also used by vehicle manufacturers for original equipment. These Naraku brake pads come with a solid braking performance and a good durability.
Reference: 366941
Brand: Malossi
High-quality replacement gudgeon pin circlips from Malossi for 10mm and 12mm gudgeon pins. When installing the circlips, please make sure that the groove is clean and the clips are positioned correctly. We recommend inserting the clips with the opening facing the piston's direction of travel and fixing them with a drop of thread glue. Scope of supply: 1...
Reference: 669417
Brand: Malossi
The HAT weights are very durable and self lubricating. Available in a range of sizes such as 16x13 (Polini, Malossi, Peugeot, Kymco, Honda, Piaggio pre 98), 17x12 (Hebo), 15x12 (TopPerformances, Minarelli standard), 17x13.5 (Piaggio Zip/Sfera MK1), 19x15.5 (Piaggio post 98)
Reference: IRC01-00
Brand: IRC
IRC high quality dual-Purpose scooter tires that provide good traction on both street and dirt.
Reference: SCT-HGPT
Brand: Pro Taper
Pro Taper is well known for manufacturing high-quality grips and Handlebar. With the MX design, Protaper now offers a grip in a classical shape. Ideal for all common downhill handlebars as well as all other handlebars.
Reference: MF55.150
Brand: Motoforce
Budget weights by Motoforce, choice of weights. Available in a range of sizes such as 16x13 (Polini, Malossi, Peugeot, Kymco, Honda, Piaggio pre 98), 17x12 (Hebo), 15x12 (TopPerformances, Minarelli standard), 17x13.5 (Piaggio Zip/Sfera MK1), 19x15.5 (Piaggio post 98)
Reference: SCT-GA001
Brand: Scootertuning.ca
Replacement reed valve gasket for all Minarelli Horizontal engines.
Reference: BR8HS-4322
Brand: NGK
The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...
Reference: STR-522.24/
Brand: Str8
These spoilers from Str8 are available in many great colours and can simply be bolted onto the fan covers. Aside from the obvious styling effect, this contributes to better airflow and hence better cooling. Attention! This is a universal part and not all scooter have same fan cover, it's possible that you have to modify your fan cover in order to install...
icon
For all order over $199.00
icon
15 days for return
icon
2 days and Overnight
icon
Safe shopping guarantee