"THIS IS THE BOARD THAT WILL GET YOU TO THE FINISH LINE"

I wanted to make a board with a wide nose and slightly more pulled-in tail to really appeal to surfers of all ability levels. For the surfer looking to consistently get to the tip, this board is perfect. It gives you the confidence to get to the nose in one fluid motion.

The main attributes of this board focus on early wave entry and stability for the surfer looking to enhance their classic longboarding style. The pulled-in tail allows for quicker rail-to-rail turns and easy set-up for nose rides. The board has a continuous easy entry rocker that is forgiving and stable for cross-stepping and late take-offs.

The midsection of the board is a quarter inch wider than most of our models, lending to more stability while moving up and down the board. The blended concave and 50/50 rails throughout make for easy transition from the back of the board to the nose "To take you from the center of the board to the finish line!"

Average nose: 19.5"
Average tail: 15.75"

7/16' Darkwood stringer

#3125 Turquoise Tint T+B 

patch

G/P

single box

Fiberglass fin inc

"THIS IS THE BOARD THAT WILL GET YOU TO THE FINISH LINE"

I wanted to make a board with a wide nose and slightly more pulled-in tail to really appeal to surfers of all ability levels. For the surfer looking to consistently get to the tip, this board is perfect. It gives you the confidence to get to the nose in one fluid motion.

The main attributes of this board focus on early wave entry and stability for the surfer looking to enhance their classic longboarding style. The pulled-in tail allows for quicker rail-to-rail turns and easy set-up for nose rides. The board has a continuous easy entry rocker that is forgiving and stable for cross-stepping and late take-offs.

The midsection of the board is a quarter inch wider than most of our models, lending to more stability while moving up and down the board. The blended concave and 50/50 rails throughout make for easy transition from the back of the board to the nose "To take you from the center of the board to the finish line!"

Average nose: 19.5"
Average tail: 15.75"

7/16' Darkwood stringer

Yelllow Tint bottom/clear deck  

patch

Cody 1/4' Black pin on deck 

G/P

single box

Fiberglass fin inc

For years The Original Levitator was our #1 selling wider noserider. When we introduced the Continental model the Levitator took a backseat and started to fade into the distance. Knowing we had the basis for a solidly successful and popular model in the Levitator Matt revisited the design this last year and updated it to our new Levitator Type 2 model.

FROM MATT CALVANI:

"I decided to take the design in a different direction and developed it into a hybrid log with performance characteristics. I wanted a board with drive to get around critical sections while maintaining glide speed, along with the ability to make faster tighter turns, in a sense I 'took the brakes off' that is common with most noseriders. I've added an edge in the tail that transitions to a 60/40 rail in the middle. I've maintained some attributes of the outline but made it noticeably narrower overall; especially in the nose and tail, while keeping its signature pointed nose. Having the wide point slightly forward still makes it an excellent noserider even with the narrower nose. Finally, eliminating the step deck allowed for more volume in the nose, offsetting the need for the additional width in the original version."

The resulting Levitator Type 2 has proven itself to be an all-around square tail log that excels in all conditions, is focused on speed, and maintains the traditional attributes of a noserider.

(2) 3/16" Darkwood stringers

 #285 Classic Blue Tint T+B

Patch

G/P

single box

fiberglass fin inc

For years The Original Levitator was our #1 selling wider noserider. When we introduced the Continental model the Levitator took a backseat and started to fade into the distance. Knowing we had the basis for a solidly successful and popular model in the Levitator Matt revisited the design this last year and updated it to our new Levitator Type 2 model.

FROM MATT CALVANI:

"I decided to take the design in a different direction and developed it into a hybrid log with performance characteristics. I wanted a board with drive to get around critical sections while maintaining glide speed, along with the ability to make faster tighter turns, in a sense I 'took the brakes off' that is common with most noseriders. I've added an edge in the tail that transitions to a 60/40 rail in the middle. I've maintained some attributes of the outline but made it noticeably narrower overall; especially in the nose and tail, while keeping its signature pointed nose. Having the wide point slightly forward still makes it an excellent noserider even with the narrower nose. Finally, eliminating the step deck allowed for more volume in the nose, offsetting the need for the additional width in the original version."

The resulting Levitator Type 2 has proven itself to be an all-around square tail log that excels in all conditions, is focused on speed, and maintains the traditional attributes of a noserider.

(2) 3/16" Darkwood stringers

 #202 Burgundy Tint T+B 

Patch

G/P

single box

fiberglass fin inc

Mick and I set out to make the ultimate noserider that could achieve parallel tens while maintaining a responsive drivey turn to take Mick’s technical approach to surfing to the next level. To make a noserider easy enough for anyone to get insane noserides, I designed a board that can lock in and lift quickly for as long as the section holds up without dropping out or fading out the back. Also, when the section flattens out, the board will slowly drop giving you time to cross-step back to the tail.

It took years of extensive experimentation with different noserider elements and trying every sort of design combination, but we finally found a predictable and consistent formula that achieved our goals.  The board has a wide parallel outline and a generous amount of nose rocker combined with 5/16” blended concave that extends to the middle of the board.  The overall rocker is flat from the middle up to an extreme kick at the very end of the tail, and the rails are pinched so they will engage into the wave’s face.  All elements are combined to work from 9’0” to 11’0”.   - Matt Calvani, Bing Shaper

Optimal nose control with positive lift sensations is what this board is all about. The Bing Continental...post on the nose and set it to cruise control. - Mick Rodgers, Team Rider

SPECIFICATIONS:

Average nose: 19.25"
Average tail: 16.5"

7/16" Darkwood stringer+(2) Black Offset Glue Lines

#630 Lt. Blue Tint Reverse/Clear bottom

patch

G/P

single box

fiberglass fin inc.

For paddlers who like to share their discoveries, this board is the perfect two-person SUP

At Red Paddle Co, we believe that adventures are best shared with others, that's why we created the 15'0'' Voyager Tandem. Imagine how much fun you'll have exploring new locations with a partner on this unique board. Designed to carry two passengers (plus a third small companion with the removal of the central cargo points), this board can also carry all your kit, so you'll have everything you'll need for a weekend-long adventure. At 8″/200mm thick, the board has a huge volume, so there's plenty of space to bring a few luxury extras with you too.

The 15'0″ inflatable SUP features seven ergonomic tubular handles on to give a cushioned, comfy grip when carrying your board. Built to the Voyager formula, it has all the technology required to keep you travelling in the right direction, even when you're carrying a lot of weight.

	Max Rider Weight	240lbs+
	Rider Style	Touring
	Min Experience	Intermediate

NEW! ADJUSTABLE CARGO SYSTEM

A new and improved cargo system for the Voyager range offers three adjustable bungee straps. A twin d-ring locking system allows easy adjustment and release and the small loop is ideal for water bottle storage. A reinforced cargo point means you can strap on enough cargo for any adventure.

NEW! ATB TANDEM BAG

With a roomy 160 litre internal capacity the new ATB tandem bag provides lots of space for your whole paddle board package!

The backpack is super comfortable to carry thanks to the anthropomorphically designed adjustable ergonomic support for your back and shoulders.

Paddles can now be packed away into the velcro securing system and the blade is safely stored in the interior blade pocket. The large outer zip pocket means any essentials can be quickly stored and are easily accessible at any point.

This new mini-noserider shape was coined the "Collector" because when you paddle it out, it will undoubtedly collect! Built primarily as a mid-range, this board appeals to a broad range of surfers and surfing styles. Matt first designed the board as a quad, yet discovered he could get great noserides too. As he got more feedback from team riders and customers, he honed in on the board's true versatility. Most people prefer to ride the board from the tail and never walk the board but were sold on the wider nose for paddling ability. This model is the ultimate quiver killer. As for design, the board has a shallow nose concave going into a slight roll into a heavy double concave in the tail. To add to the board's versatility, we recommend the board with a 4+1 fin box configuration so that it can be ridden as a quad, a 2+1 or a single fin. The quad setup works amazing for quick direction changes and surfing in the pocket. The 2+1 setup gives you drive and control and you can lean hard into each turn. As a single fin you can take classic high lines with the wide point being forward and still execute smooth cutbacks and noserides. The most popular and versatile size range is 7'4-7'10" for all-around noseriding and turning ability.

Average nose: 18"

Average tail: 15.125"

1/8" Applecore stringer

#3125 Turquoise Tint T+B 

Patch

G/P

Futures 4+1

prod sides inc

This new mini-noserider shape was coined the "Collector" because when you paddle it out, it will undoubtedly collect! Built primarily as a mid-range, this board appeals to a broad range of surfers and surfing styles. Matt first designed the board as a quad, yet discovered he could get great noserides too. As he got more feedback from team riders and customers, he honed in on the board's true versatility. Most people prefer to ride the board from the tail and never walk the board but were sold on the wider nose for paddling ability. This model is the ultimate quiver killer. As for design, the board has a shallow nose concave going into a slight roll into a heavy double concave in the tail. To add to the board's versatility, we recommend the board with a 4+1 fin box configuration so that it can be ridden as a quad, a 2+1 or a single fin. The quad setup works amazing for quick direction changes and surfing in the pocket. The 2+1 setup gives you drive and control and you can lean hard into each turn. As a single fin you can take classic high lines with the wide point being forward and still execute smooth cutbacks and noserides. The most popular and versatile size range is 7'4-7'10" for all-around noseriding and turning ability.

Average nose: 18"

Average tail: 15.125"

1/8" Applecore stringer

#550 Dusty Blue Tint T+B

Patch

Futures 4+1

prod sides inc